Shop
Showing 1–16 of 82 results
-
1 Phase Electricity Meters
ACTOM DDS28 Single Phase Electronic Electricity Meter
The ACTOM DDS28 is a single phase 220-230Vac, 100A residential electricity meter that provides customers with high accuracy, reliability, serviceability and cost-effectiveness over the entire life time. It’s one of the most adaptable meters on the residential market with anti-tamper design.
This meter complies with IEC 61052-11 and IEC61053-21.
This meter is a direct replacement for mechanical meters and metering different single phase loads.
SKU: n/a -
Water Meter Enclosures
AGB 800 (Above Ground Boxes)
- Available with black & blue lids
- When installed, it is the most stable & robust on the market
- Secure lockable patented design, accessed by special key only
- AGB meter reading in 5 seconds – 95% time saving
- Meter & valves above ground level for ease of maintenance & reading
- No sand / mud covering the meter while reading
- Secure council isolating ¼ turn valve, not accessible by the consumer
- Secure flow restrictor, easily installed & removed without changing fittings
- Secondary locking device available for Restrictor Body
- Consumer Valve above ground for easy access with a removable handle for the consumer
- Easily installed by semi-skilled labour
- Factory assembled unit which is quality & pressure tested to 24 Bar
- Cartridge Meters facilitate servicing without removal of meter body
- Piping and fittings are fusion-welded
- Reflective stand numbers easily applied and visible on AGB
- Factory pressure tested for 2 mins to 24 Bar reducing the possibility for undetected leaks
SKU: n/a -
Services
AMR & Smart Services
Electricity and other utility accounts are often presented in such a way as to make it impossible to verify under normal circumstances; often the bill is simply presented as a single entry in an account without any breakdown of how the amount is determined. Verifying these bills normally requires the use of specialised consultants who are experts in utility tariffs. With the Mobi Power Metering and Billing Portal it is quick and simple to perform billing verification online.
SKU: n/a -
1 Phase Electricity Meters
DIN 100A Electronic Single Phase kWh Electricity Meter
Electronic electricity meter that fits into your DB (distribution board ) for a neat installation.
Also available in a three phase 100A per phase.
Conforms to IEC 62053 – 21 Accuracy Class 1 Operating Temp -25°C to +55°C AC Voltage withstand 4Kv for 1 min Impulse Voltage withstand 6Kv – 1.2/50us Frequency Range 50 / 60Hz ±10% SKU: n/a -
Water Meters
Domestic hot water meter DN15-20
FEATURES
• Approved to SANS1529 -1: 2019 Class B specifcation. (SA 1566)
• For Horizontal installation.
• Clear, easily read, dry dial counter. Reads to 0.0002m3.
• Cold water meter working temperature ≤ 50°C.
• Hot water meter working temperature ≤ 90°C.
• Strainer removeable for maintenance in the feld.
• Working pressure 1600 kPa.
• Suitable for measuring potable water.
• Inlet and Outlet threads compatible with ISO metric sizes.
• Dezincifcation Resistant Brass body. (DZR)
• Less susceptible to damage caused by suspended solids.
• Pulse prepared – different settings available. (To be specifed)
• Recalibrated possible in a SANAS accredited verifcation laboratory.SKU: n/a -
Water Meter Enclosures
ECON Ground Level Water Meter Box
!! Excluding meter & valve !!
ECON WATER METER BOX
- ±220mm x 150mm x 170mm (approximate dimensions)
- Used to accommodate 15mm and 20mm plastic or brass meters in a light duty plastic construction
- Designed to be installed level with the ground
SKU: n/a -
Water Meters
Elster/Honeywell C4000 Combi Bulk Water Meter
The C4000 meter is designed for bulk flow applications where large variations in flow rate occur. Full or medium flow through the primary Woltmann type metering chamber gives high metering accuracy, achieving Class B approval. At lower flow rates the secondary volumetric V220 meter achieves optimum accuracy, reflected by its Class C approval. Available in sizes from 50mm to 100mm, with flow rates from 15l/h to 250m³/h.
- Can be installed in horizontal, vertical or inclined pipelines without affecting accuracy.
- Suitable in areas where large variations in flow rate can be expected.
- Extended low and high flow performance. • Innovative, compact, in-line design.
- Features proven Elster technologies.
- Long service life.
- Easy to maintain and install.
- Choice of registers available.
SKU: n/a -
Water Meters
Elster/Honeywell H4000 Woltmann Bulk Water Meter
The H4000 is a Woltmann-type meter designed for measuring bulk flows of cold potable water for revenue billing in commercial or industrial applications and distribution system monitoring. Available in sizes 40mm to 300mm for flow rates of between 0.35m³/h and 2000m³/h.
- Multiple pulsed output for increased management information.
- Extended low and high flow performance.
- Suitable for forward and reverse flow metering.
- ISO 4064 Class B specification for forward flow installations in the horizontal, vertical and inclined position.
- ISO 4064 Class B specification for the reverse flow for sizes up to 150mm.
- Robust shroud and copper can register for long life and readability.
- Use of an in-line strainer to protect the rotor.
- Maximum working temperature of 50ºC.
- Maximum working pressure of 16 bar.
SKU: n/a -
Water Meters
Elster/Honeywell H5000 High Performance Bulk Water Meter
The H5000 is the next generation of Woltmann (Turbine) bulk water meters from Elster. With a range of important features, H5000 represents the very highest performance in bulk flow water metering making it ideally suited to both billing and water distribution applications. Available in seven sizes for flow rates between 40 l/h and 200 m3/h. The H5000 meter has an advanced electronic register which includes integrated communications covering a range of industry standard outputs compatible with common AMR/AMI systems and data-logging equipment.
- Wide measuring range R1500+
- Retro-fit mechanism into the H4000 body
- Uses innovative measuring technology
- Electronic register includes an integrated communications cable
- Electronic register pre-equipped for AMR/AMI with pulse, encoder, Aquabus, M – Bus, L – Bus outputs
- Value adding AMR/AMI style features such as flowrate display, data-logging, leak detection, tamper alarms and tariffing
- Approved to the last European Directive 2004/22/EC
- Maximum working temperature of 50 C
- Maximum working pressure of 16 bar
SKU: n/a
